The VT 20 single-pole voltage detector of direct and alternating current enables for save, easy and exact checking a voltage presence in circuits and electrical arrangements. The VT 20 voltage detector is equipped with internal operation test arrangement supplied with 1.5 V, 2 A battery. It makes possible to check alternating voltage presence by contact method in the range 70 – 250 V and direct current by contact-less method in the range to 250 V, and also polarity in the range 1.5 to 36 V.
Additional protection devices.
The C.A. 704 is low-voltage of direct and alternating current digital sound-optical detector, circuit continuity detector and phase swirl direction detector (two-conductor’s method).
The C.A. 760 is low-voltage of direct and alternating current digital sound-optical detector of diode type, circuit continuity detector and phase swirl direction detector (two-conductor’s method). C.A.
The ChM clamshell is designed for installing and removing fuse cartridges, insulating shields, insulating screens etc. in electrical equipment with voltage up to 110 kV. The arms and clamp jaws of the clamshell (made of high mechanical strength plastic) are fitted with articulated joint on a steel bolt. Rotation of the bolt brings about the clamping or releasing the clamshell jaws.
The DIPS-B insulating pole – depending on rated voltage - is designed for servicing electrical equipment of low-, medium- and high-rated voltages. It is used for protection against electric shock by insulating the operator from live electrical equipment. The insulating and handling part of the pole is made of an epoxy-glass tube filled with polyurethane foam or an empty standard tube (S) of high mechanical and electrical resistance.
For easy identification, the DIPS-B poles are of orange colour.
The pole with rated voltage 30 kV a.c. for relocation of rubber insulated conductors has been developed in co-operation with the Brown Coal Mine ”Konin”.
Its main task is to move (relocate) the rubber insulated conductor with a diameter up to 100 mm behind the excavators and belt conveyors in the area of open pits.
Earth clamps are used in all earthing device types. It is possible to purchase them individually, as spare parts. "Activation" indicates these clamps in a special way.
Electro-insulating rubber products and other products
